Short answer: KeystoneMold LLC, a Wyoming USA company run by a Taiwanese team, supplies straight, stepped and shaped core pins to drawing. Pins are machined at our Dongguan factory (DongGuan CT Mould), ground on critical diameters, Inspection report requirements are confirmed per order. One piece is fine for standard sizes.
Reviewed by Leon Wang, CEO & Technical Director, KeystoneMold LLC.
A core pin forms a hole, bore or undercut feature in the moulded part. Failures usually come from diameter drift after heat treatment, tip finish that sticks, or a length-to-diameter ratio that bends under injection pressure. We quote against those risks — diameter tolerance, tip finish and L/D — not against a catalogue page alone.
| Item | Typical range |
|---|---|
| Types | Straight, stepped, tapered tip, custom tip / contour to drawing |
| Diameter | 0.8 – 25 mm (HSS preferred under ~2 mm) |
| Overall length | Up to 250 mm typical; longer reviewed per L/D |
| Diameter tolerance | ~0.005 mm typical on ground diameters; tighter to drawing |
| Straightness | Reviewed per L/D ratio before quoting |
| Materials | SKD61 (≈H13), HSS / SKH51, SUJ2 (≈52100); others on request |
| Hardness (typical) | HRC 58–64 depending on steel and heat treat |
| Surface | Ra 0.2 typical; tip polish on request |
| Inspection | Hexagon CMM + TESA optical available; inspection report requirements confirmed per order |
Values are typical. Send your drawing and we confirm against the actual requirement — we do not quote from a catalogue alone.
Full comparison: SKD61 vs SKH51 vs SUJ2.
Inspection report requirements are confirmed per order. When a measured dimensional report is provided, it lists nominal, tolerance and actual value for critical features — measured data, not a certificate of conformity. See the format: sample inspection report, and how to read an inspection report.
| Order type | Typical range | What drives it |
|---|---|---|
| Standard / simple sizes | ~7–15 working days ex-factory | Qty, heat treat |
| Custom tip / stepped | ~10–20 working days ex-factory | Geometry, coating |
| Rush / repair | Often a few working days for simple, small qty | Steel on hand |
| Express to US | Typically ~3–7 days after dispatch | Carrier / customs |
We confirm the ship date with the quotation, not after the order.
Full guide: What to include in a mold component RFQ. Cross-ref sizes: DIN / JIS / catalog refs.
About 0.8 mm diameter in HSS, subject to drawing review and L/D.
Yes, where surface finish affects ejection or cosmetics.
Yes, up to a length-to-diameter ratio we review with you before quoting.
Inspection report requirements are confirmed per order.
Leon Wang, CEO & Technical Director, flags missing tolerances, steel or heat-treat callouts before we quote.
One piece for standard sizes. Custom pins are quoted per drawing.
STEP / IGES / DWG / PDF accepted. One piece is acceptable for standard sizes.
Request a Quote LinkedIn — Jaco DengBuying several components for the same mould? Send one drawing pack — we quote them together and ship them together.