KeystoneMold
Home / Components / Ejector Sleeves

Custom Ejector Sleeves — Bore Matched to Your Core Pin, Inspection Confirmed Per Order

Short answer: KeystoneMold LLC, a Wyoming USA company run by a Taiwanese team, supplies ejector sleeves to ISO 8405 / DIN 16756, JIS or your drawing. Sleeves are machined at our Dongguan factory (DongGuan CT Mould): bore and outside diameter are both ground, the bore is matched to your core pin, and bore-to-OD concentricity is measured on a Hexagon CMM. Inspection report requirements are confirmed per order. One piece is fine for standard sizes.

Reviewed by Leon Wang, CEO & Technical Director, KeystoneMold LLC.

Ejector sleeve — sectional drawing
Sectional drawing — ejector sleeve. Bore matched to your core pin.
Request a Quote — upload a print Email RFQ LinkedIn — Jaco Deng

Where sleeves fail

What an ejector sleeve does

An ejector sleeve is a hollow pin that slides over a fixed core pin and pushes a round boss, tube or screw post off the core. Because it runs on two surfaces at once — the core pin inside and the ejector bore outside — it is less forgiving than a plain pin. Most sleeve problems come from bore clearance that is too tight or too loose, poor concentricity between bore and OD, thin walls on small sleeves, or a soft working surface on high-cycle or glass-filled jobs. That is why we quote a sleeve against the core pin it runs on, not as a standalone tube.

Specification

Typical range — confirmed per drawing

ItemTypical range
StandardsISO 8405 / DIN 16756 sizing; JIS-style; to drawing
Outside diameter (OD)3 – 30 mm typical
Inside diameter (bore)1.5 – 25 mm typical
LengthUp to 300 mm typical
BoreGround to match your core pin; H7-type fit or clearance as specified
GrindingConfirmed per drawing / per order on critical diameters
Bore-to-OD concentricity0.005 mm target, measured on CMM; confirmed per drawing
MaterialsSKD61 (≈H13 / 1.2344), SUJ2 (≈52100); others on request
Hardness (typical)SKD61 through-hardened ≈HRC 50–55; SKD61 nitrided surface ≈900+ HV; SUJ2 ≈HRC 58–62
NitridingOptional; case depth about 0.05–0.1 mm on request
Matching core pinCan be supplied as a set with the sleeve
InspectionHexagon CMM + TESA optical available; inspection report requirements confirmed per order

Values are typical. Send your drawing and we confirm against the actual requirement.

How we make it

Machined at our Dongguan factory, measured before it ships

  1. Bar or tube stock cut; material grade checked against the order
  2. CNC turning of bore, outside diameter and head
  3. Heat treatment to the specified hardness
  4. Internal grinding of the bore and external grinding of the OD
  5. Optional nitriding (quoted separately; standard sleeve is through-hardened)
  6. Concentricity, bore and OD measured on the CMM
  7. Rust-preventive oil, packing; sleeve and core pin packed together when ordered as a set

Inspection

What the CMM report shows

Inspection report requirements are confirmed per order. When a measured report is provided, it covers: bore diameter, outside diameter, bore-to-OD concentricity, head diameter and thickness, overall length and any step length — nominal, tolerance and measured value for each. See the format: sample inspection report.

Lead time

Ranges, not guarantees

Order typeTypical rangeWhat drives it
Standard sizes~7–15 working days ex-factoryQuantity, nitriding queue
Custom sleeves to drawing~10–20 working days ex-factory (typical)Bore size, heat treatment, nitriding
Rush / repair replacementOften a few working days for simple sleeves in small quantitiesSteel on hand, nitriding yes/no
Express shipping to the USTypically ~3–7 days after dispatchCarrier, customs clearance

We confirm the ship date with the quotation. If a rush date can't be met, we say so before you order.

RFQ checklist

For ejector sleeves

Full guide: What to include in a mold component RFQ.

Boundaries

What we don't do

  • We don't manufacture in the USA. KeystoneMold LLC is a US company; sleeves are made at our Dongguan factory and ship from China.
  • We don't claim certifications we don't hold.
  • We don't keep a US stock of sleeves; every sleeve is made or finished to order.
  • We don't grind a bore to a nominal number without knowing the core pin it runs on. If we don't have the core pin size, we ask.
  • We don't quote very thin-wall or very long small-bore sleeves blind — we check wall thickness and grindability first and tell you if the design is risky.

Questions buyers ask

What concentricity can you hold on an ejector sleeve?

Our target is 0.005 mm between bore and outside diameter, measured on the Hexagon CMM; the achievable value depends on bore size and length, and we confirm it per drawing.

Can you machine the sleeve to my existing core pin?

Yes. Send the core pin diameter with its tolerance (or the drawing) and the clearance you want; we grind the bore to match. If the core pin is worn, we can quote a new matched pin and sleeve set.

Is nitriding included?

No — the standard sleeve is through-hardened. Nitriding is quoted as an option; we recommend it for glass-filled resins and high-cycle tools.

What is the smallest bore you can make?

Our typical range starts at about 1.5 mm. Very small bores on long sleeves are limited by internal grinding; send the drawing and we will confirm.

Can you make equivalents to DME, HASCO or MISUMI sleeves?

Yes, to their published dimensions and materials, as equivalents — not branded parts. Send the part number and we confirm the details before quoting.

What is the minimum order?

One piece for standard sizes; custom sleeves are quoted per drawing.

Can I get a sample first?

For a new customer we can make one free sample when appropriate, so you can check fit on your core pin before a larger order.

Next step

Send a drawing and your core pin size — reply within one business day

STEP / IGES / DWG / PDF accepted.

Request a Quote LinkedIn — Jaco Deng

Related reading

Related components

Buying pins, sleeves and core pins for the same mold? Send one drawing pack — we quote and ship them together.