Use this page to map a standard or catalogue callout to what we machine. We supply dimensional equivalents to published standards — not branded DME, HASCO or MISUMI parts. Always confirm from the drawing or official catalogue sheet before ordering.
| Family | Common refs | What to send us |
|---|---|---|
| ISO / DIN | ISO 6751 · DIN 1530-1 (straight) | d × L, head type, steel, fit (g6 default) |
| Stepped | ISO 8694 · DIN 1530-2 | Step Ø × step L + overall L |
| Flat / blade | ISO 8693 · DIN 1530-3 | Blade W × T × L |
| JIS-style | JIS ejector pin sizing (metric) | JIS designation or full dims |
| Catalog shorthand | MISUMI / Punch / HASCO / DME style part numbers | Part number or drawing — we confirm dims before quote |
See also: ejector pins product page.
| Family | Common refs | What to send us |
|---|---|---|
| DIN guide pins | DIN-style shoulder / straight | Ø × L, fit class (h6/m6), hardness |
| Guide bushes | Flanged / straight, H7 bore typical | Bore / OD / L; clearance to pin |
| Catalog shorthand | MISUMI-compatible numbering on request | Part number or drawing |
| Type | Typical callouts | What to send us |
|---|---|---|
| A / B / C | SR radius, orifice Ø, OD, length | Type + SR + orifice + steel |
| Extended / custom | To drawing | Full drawing / STEP |
| Common callout | Approx. equivalents | Notes |
|---|---|---|
| SKD61 | ≈ H13 / 1.2344 | Hot work; often nitrided |
| SKH51 | ≈ M2 HSS | Fine pins, high wear |
| SUJ2 | ≈ 52100 | General purpose; not for hot/corrosive |
Detail: SKD61 vs SKH51 vs SUJ2.