Insert pins and core pins form small holes or details in a moulded part. Machined from HSS, SKD61 or carbide to drawing, at our Dongguan factory (DongGuan CT Mould).
| Diameter | 0.5 – 20 mm |
| Length | up to 200 mm |
| Material | HSS / SKD61 / SUJ2 / carbide on request |
| Hardness | HRC 58 – 64 depending on material |
| Tolerance | 0.005 mm on diameter, 0.01 mm on shoulder |
| Surface | ground Ra 0.2, optional polish on the tip |
Values are typical. Send your drawing and we confirm against the actual requirement — we do not quote from a catalogue.
Inspection report requirements are confirmed per order.
Down to 0.5 mm diameter in HSS, subject to drawing review.
Yes — tip polish is available where surface finish affects part ejection.
Yes, on cylindrical grinding, verified on the CMM; the report shows nominal, tolerance and actual value.
STEP / IGES / DWG / PDF all accepted. We reply within one business day. One piece is acceptable for standard sizes.
Request a quoteBuying several components for the same mould? Send one drawing pack and we quote them together, ship them together.