Short answer: KeystoneMold LLC supplies wear plates (gibs / slide wear pads) in bronze-graphite or hardened steel, ground flat and parallel, with optional oil grooves. Machined at DongGuan CT Mould; inspection report requirements are confirmed per order.
Reviewed by Leon Wang, CEO & Technical Director, KeystoneMold LLC.
Wear plates take the sliding load so the expensive slide or cavity steel lasts longer. Flatness, parallelism and material choice decide whether the slide runs free or galls. We grind both faces and check flatness before packing.
| Item | Typical range |
|---|---|
| Thickness | 3 – 20 mm typical |
| Size | Up to ~500 × 500 mm |
| Materials | Bronze-graphite / S50C hardened / SKD11; others on request |
| Flatness | ~0.01 mm per 100 mm typical |
| Parallelism | ~0.01 mm typical |
| Surface | Ground Ra 0.4 typical |
| Features | Oil grooves, counterbores, pockets to drawing |
| Inspection | Surface plate + CMM; inspection report requirements confirmed per order |
Values are typical. Send your drawing and we confirm against the actual requirement — we do not quote from a catalogue alone.
Inspection report requirements are confirmed per order. When a measured dimensional report is provided, it lists nominal, tolerance and actual value for critical features — measured data, not a certificate of conformity. See the format: sample inspection report, and how to read an inspection report.
| Order type | Typical range | What drives it |
|---|---|---|
| Simple flat plates | ~7–15 working days ex-factory | Size, material |
| Grooved / complex | ~10–20 working days | Features, heat treat |
| Express to US | ~3–7 days after dispatch | Carrier / customs |
We confirm the ship date with the quotation, not after the order.
Full guide: What to include in a mold component RFQ. Cross-ref sizes: DIN / JIS / catalog refs.
Bronze-graphite for dry running and lower friction; hardened steel where load is high and lubrication is available.
Yes — grooves and counterbores to drawing.
About 0.01 mm per 100 mm, checked on a surface plate and CMM.
Inspection report requirements are confirmed per order.
Leon Wang, CEO & Technical Director.
STEP / IGES / DWG / PDF accepted. One piece is acceptable for standard sizes.
Request a Quote LinkedIn — Jaco DengBuying several components for the same mould? Send one drawing pack — we quote them together and ship them together.