Short answer: KeystoneMold LLC supplies straight and flanged guide bushes to DIN / catalogue-equivalent or drawing. Machined at DongGuan CT Mould; can be paired with our guide pins to a stated clearance. Inspection report requirements are confirmed per order.
Reviewed by Leon Wang, CEO & Technical Director, KeystoneMold LLC.
The bush is the wear partner to the guide pin. Bore size, length of engagement and material decide how long the alignment stays true. When you send both pin and bush drawings (or one clearance callout), we grind them as a set.
| Item | Typical range |
|---|---|
| Types | Straight, flanged, oil-groove; custom to drawing |
| Bore | Matches pin diameter; H7 / specified clearance |
| OD | To drawing / catalogue equivalent |
| Length | To engagement length on drawing |
| Materials | SUJ2, bronze / bronze-graphite, case-hardened steel |
| Hardness | Per material; SUJ2 typically HRC 58–62 |
| Inspection | Hexagon CMM; inspection report requirements confirmed per order |
Values are typical. Send your drawing and we confirm against the actual requirement — we do not quote from a catalogue alone.
Inspection report requirements are confirmed per order. When a measured dimensional report is provided, it lists nominal, tolerance and actual value for critical features — measured data, not a certificate of conformity. See the format: sample inspection report, and how to read an inspection report.
| Order type | Typical range | What drives it |
|---|---|---|
| Standard sizes | ~7–15 working days ex-factory | Qty |
| Matched pin + bush set | ~10–20 working days | Clearance callout |
| Express to US | ~3–7 days after dispatch | Carrier / customs |
We confirm the ship date with the quotation, not after the order.
Full guide: What to include in a mold component RFQ. Cross-ref sizes: DIN / JIS / catalog refs.
Yes. Send the clearance or both drawings and we grind them as a pair.
Bronze / bronze-graphite for lower friction; hardened steel for higher load with lubrication.
H7 is typical; tighter fits to drawing are reviewed before quoting.
Inspection report requirements are confirmed per order.
Leon Wang, CEO & Technical Director.
STEP / IGES / DWG / PDF accepted. One piece is acceptable for standard sizes.
Request a Quote LinkedIn — Jaco DengBuying several components for the same mould? Send one drawing pack — we quote them together and ship them together.