Slide seats carry the sliding core or slide in a mould with undercuts. Machined from S50C or P20, with wire-cut slots and ground faces, at our Dongguan factory (DongGuan CT Mould).
| Size | up to 900 × 500 × 450 mm |
| Material | S50C / P20 / 718H / SKD61 |
| Hardness | as supplied or HRC 48 – 52 on request |
| Slot tolerance | ±0.01 mm |
| Surface | ground Ra 0.8 on sliding faces |
| Machining | CNC milling, wire-cut EDM, surface grinding |
Values are typical. Send your drawing and we confirm against the actual requirement — we do not quote from a catalogue.
Inspection report requirements are confirmed per order.
Up to 900 × 500 × 450 mm on our Makino F5 machining centre.
±0.01 mm, verified on the CMM.
Yes — when both parts are ordered together we machine and check them as a matched pair.
STEP / IGES / DWG / PDF all accepted. We reply within one business day. One piece is acceptable for standard sizes.
Request a quoteBuying several components for the same mould? Send one drawing pack and we quote them together, ship them together.