Support pillars carry the load of the mould plate between the clamp plate and the cavity block. Machined from S45C or S50C, ground to height within 0.01 mm, at our Dongguan factory (DongGuan CT Mould).
| Diameter | 20 – 120 mm |
| Length | up to 500 mm |
| Material | S45C / S50C |
| Height tolerance | 0.01 mm, matched sets within 0.005 mm |
| Flatness | 0.01 mm on both ends |
| Hardness | as supplied or HRC 50 on request |
Values are typical. Send your drawing and we confirm against the actual requirement — we do not quote from a catalogue.
Inspection report requirements are confirmed per order.
Yes — sets are ground and matched within 0.005 mm.
0.01 mm individually, 0.005 mm across a matched set.
Yes, on request to drawing.
STEP / IGES / DWG / PDF all accepted. We reply within one business day. One piece is acceptable for standard sizes.
Request a quoteBuying several components for the same mould? Send one drawing pack and we quote them together, ship them together.