Short answer: KeystoneMold LLC machines A, B and C type sprue bushings (and extended / custom profiles) from SKD61 or S136 at DongGuan CT Mould. Nozzle spherical radius matched to your SR callout; inspection report requirements are confirmed per order.
Reviewed by Leon Wang, CEO & Technical Director, KeystoneMold LLC.
The sprue bushing seals against the machine nozzle and feeds melt into the runner. A wrong spherical radius leaks; a rough orifice strings or sticks. We machine radius, orifice and locating diameter to the drawing — and measure them.
| Item | Typical range |
|---|---|
| Types | A / B / C type, extended, custom profile |
| Nozzle radius (SR) | SR10 – SR30 typical; matched within ~0.01 mm |
| Orifice | Ø2 – Ø8 mm typical |
| Materials | SKD61 / S136 / 718H |
| Hardness | HRC 48–52 (S136) or 56–62 (SKD61) typical |
| Fits | H7 locating / radius profile within ~0.01 mm |
| Inspection | Hexagon CMM profile check; inspection report requirements confirmed per order |
Values are typical. Send your drawing and we confirm against the actual requirement — we do not quote from a catalogue alone.
Inspection report requirements are confirmed per order. When a measured dimensional report is provided, it lists nominal, tolerance and actual value for critical features — measured data, not a certificate of conformity. See the format: sample inspection report, and how to read an inspection report.
| Order type | Typical range | What drives it |
|---|---|---|
| Standard A/B/C types | ~7–15 working days ex-factory | Qty, steel |
| Custom / extended | ~10–20 working days | Profile, heat treat |
| Express to US | ~3–7 days after dispatch | Carrier / customs |
We confirm the ship date with the quotation, not after the order.
Full guide: What to include in a mold component RFQ. Cross-ref sizes: DIN / JIS / catalog refs.
A, B and C type as standard, plus extended and custom profiles.
Yes — specify SR and we machine within ~0.01 mm.
S136 for abrasive plastics; SKD61 where higher hardness is needed.
Inspection report requirements are confirmed per order.
Leon Wang, CEO & Technical Director.
STEP / IGES / DWG / PDF accepted. One piece is acceptable for standard sizes.
Request a Quote LinkedIn — Jaco DengBuying several components for the same mould? Send one drawing pack — we quote them together and ship them together.